Welcome to Midatronics Website

  Call: +390399005318

  info@midatronics.com

MKR_Sharky_I

MKR Sharky I

Sharky MKR board is based on the Sharky PCB module that contains an STMicroelectronics STM32WB55CG, a dual-core MCUs with wireless support, based on an Arm? Cortex?-M4 core running at 64 MHz (application processor) plus an Arm? Cortex?-M0+ core at 32 MHz (network processor). With two totally independent cores, this innovative architecture is optimized for real‑time execution (radio‑related software processing). The STM32WB55 Bluetooth 5.0-certified device offers Mesh 1.0 software support, multiple profiles and flexibility to integrate proprietary BLE stacks. OpenThread-certified software stack is available. The radio can also run BLE/OpenThread protocols concurrently. The embedded generic MAC allows the usage of other IEEE 802.15.4 proprietary stacks like ZigBee ? , or proprietary protocols, giving even more options for connecting devices to the Internet of Things (IoT). The board pinout is compatible with Arduino MKR boards, and can be programmed with Arduino IDE thanks to the STM32Duino project.

MKR_Sharky_II

MKR Sharky II

Sharky MKR board is based on the Sharky UFL module that contains an STMicroelectronics STM32WB55CG, a dual-core MCUs with wireless support, based on an Arm? Cortex?-M4 core running at 64 MHz (application processor) plus an Arm? Cortex?-M0+ core at 32 MHz (network processor). With two totally independent cores, this innovative architecture is optimized for real‑time execution (radio‑related software processing). The STM32WB55 Bluetooth 5.0-certified device offers Mesh 1.0 software support, multiple profiles and flexibility to integrate proprietary BLE stacks. OpenThread-certified software stack is available. The radio can also run BLE/OpenThread protocols concurrently. The embedded generic MAC allows the usage of other IEEE 802.15.4 proprietary stacks like ZigBee ? , or proprietary protocols, giving even more options for connecting devices to the Internet of Things (IoT). The board pinout is compatible with Arduino MKR boards, and can be programmed with Arduino IDE thanks to the STM32Duino project.

MKR_SharkyPro_I

MKR SharkyPro I

Sharky MKR board is based on the SharkyPro I module that contains an STMicroelectronics STM32WB55CG, a dual-core MCUs with wireless support, based on an Arm? Cortex?-M4 core running at 64 MHz (application processor) plus an Arm? Cortex?-M0+ core at 32 MHz (network processor). With two totally independent cores, this innovative architecture is optimized for real‑time execution (radio‑related software processing). The STM32WB55 Bluetooth 5.0-certified device offers Mesh 1.0 software support, multiple profiles and flexibility to integrate proprietary BLE stacks. OpenThread-certified software stack is available. The radio can also run BLE/OpenThread protocols concurrently. The embedded generic MAC allows the usage of other IEEE 802.15.4 proprietary stacks like ZigBee ? , or proprietary protocols, giving even more options for connecting devices to the Internet of Things (IoT). The board pinout is compatible with Arduino MKR boards, and can be programmed with Arduino IDE thanks to the STM32Duino project.

MKR_SharkyPro_II

MKR SharkyPro II

Sharky MKR board is based on the SharkyPro II module that contains an STMicroelectronics STM32WB55CG, a dual-core MCUs with wireless support, based on an Arm? Cortex?-M4 core running at 64 MHz (application processor) plus an Arm? Cortex?-M0+ core at 32 MHz (network processor). With two totally independent cores, this innovative architecture is optimized for real‑time execution (radio‑related software processing). The STM32WB55 Bluetooth 5.0-certified device offers Mesh 1.0 software support, multiple profiles and flexibility to integrate proprietary BLE stacks. OpenThread-certified software stack is available. The radio can also run BLE/OpenThread protocols concurrently. The embedded generic MAC allows the usage of other IEEE 802.15.4 proprietary stacks like ZigBee ? , or proprietary protocols, giving even more options for connecting devices to the Internet of Things (IoT). The board pinout is compatible with Arduino MKR boards, and can be programmed with Arduino IDE thanks to the STM32Duino project.

Dust-ADI-Sensor

Dust-ADI-Sensor

A breakout board developed to start working with Dusty PCB Ant easily. It comes with a connector with 2 screw terminals, ideal for connecting a battery pack or any 3.3V external power source.

Dustino_PCB_Antenna

Dustino PCB Antenna

This document describes DUSTINO, an Arduino MKR1000 form factor board that represents a key solution for easy and fast prototyping of the Dust wireless technology. It is Arduino IDE compatible and powered by USB or battery.

Dustino_UFL

Dustino UFL

This document describes DUSTINO, an Arduino MKR1000 form factor board that represents a key solution for easy and fast prototyping of the Dust wireless technology. It is Arduino IDE compatible and powered by USB or battery.

Dragonfly

Dragonfly

All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Arrow Electronics without notice

Breakout_Dusty_PCB_Antenna

Breakout Dusty PCB Antenna

An extremely small module networked by SmartMesh IP with an on-board PCB antenna, incorporating a LTC5800-IPM, a highly integrated low power radio design with an ARM

Breakout_Dusty_UFL

Breakout Dusty UFL

A new Sensor shield in Arduino form factor that allows you to measure temperature, humidity, pressure and quality of the air you're breathing. Check out this little piece of marvellous IOT technology for smart buildings and more.

Lion

Lion

The ASME Lion SoM features the Atmel D21 Ultra low-power microcontroller using the 32-bit ARM Cortex M0 processor that is supported by the Arduino IDE for fast and easy software development cycle.

Fox_3

Fox 3

The ASME Fox 3 SoM features the Atmel D21 Ultra low-power microcontroller using the 32-bit ARM Cortex M0+ processor that is also supported by the Arduino IDE for a fast and easy software development cycl

Tiger_

Tiger

The ASME Tiger board is a ready-to-use IoT hardware for prototyping new devices. Its form factor make sit able to be compatible with Shields. It mounts two MCUs and can be used in two different ways depending on your mode of operation.

Sigfox_Button_PCB

Sigfox Button PCB

The Sigfox Button PCB, MDX-SB01WH-P01 is an IoT handheld wireless notification button. This battery powered electronic device that can be useful to signal events to a cloud server and then to a person or organization. The wireless transmission uses the Sigfox network. This board is provided without housing.

MKR_Tracky

MKR Tracky

This document describes MKR Tracky, an Arduino MKR1000 form factor board that represents a key solution for easy and fast prototyping of the Dust wireless technology. It is Arduino IDE compatible and powered by USB or battery. It will especially be useful for both the Makers community, as an Arduino compatible board, and the R&D teams of larger entities. Being the TRACKY OPEN on the board CE and FCC certified, there's no need to certify the single board produced using MKR Tracky, making it faster and more inexpensive to prototype and produce.

Breakout_Sharky_I

Breakout Sharky I

Breakout Board with Sharky Module with PCB antenna, BLE, THREAD, ZIGBEE

Breakout_Sharky_II

Breakout Sharky II

Breakout Board with Sharky Module with UFL connector, BLE, THREAD, ZIGBEE

Breakout_SharkyPro_I

Breakout SharkyPro I

Breakout Board with Sharky Module with Chip antenna, BLE, THREAD, ZIGBEE

Breakout_SharkyPro_II

Breakout SharkyPro II

Breakout Board with Sharky Module no antenna, BLE, THREAD, ZIGBEE

Sharky_I_Dev_KIT

Sharky I Dev KIT

Sharky I Developer's KIT | Sharky Module PCB Antenna | MKR | BreakOut | BLE, THREAD, ZIGBEE

Sharky_II_Dev_KIT

Sharky II Dev KIT

Sharky II Developer's KIT | Sharky Module UFL connector | MKR | BreakOut | BLE, THREAD, ZIGBEE

SharkyPro_I_Dev_KIT

SharkyPro I Dev KIT

SharkyPro I Developer's KIT | Sharky Module Chip Antenna | MKR | BreakOut | BLE, THREAD, ZIGBEE

SharkyPro_II_Dev_KIT

SharkyPro II Dev KIT

SharkyPro II Developer's KIT | Sharky Module No Antenna | MKR | BreakOut | BLE, THREAD, ZIGBEE

Breakout_Tracky_Open

Breakout Tracky Open

Breakout Board with Tracky Open Module | SIGFOX

Breakout_Tracky_Modem

Breakout Tracky Modem

Breakout Board with Tracky Modem Module | SIGFOX

Tracky_Dev_KIT

Tracky Dev KIT

Tracky Developer's KIT | Tracky Open Module | MKR | BreakOut | SIGFOX

ITM-MKR680

ITM-MKR680

The ITM-MKR680 board is a shield compatible with the new Arduino's MKR form factor. It's based on the Bosch Sensortec BME680, an integrated environmental sensor that can detect a broad range of gases to measure indoor air quality for personal well being (VOC). The BME680 it's also able to measure pressure, humidity and temperature.

MCS27561-SH-mCube_

MCS27561-SH-mCube

This document describes the MCS27561-SH-mCube Shield, a multi sensor IoT Shield, developed for Arrow Electronics, suitable for hardware and software prototyping on Arduino Zero form factor platforms.